How to Install a Viridian E Series Laser on Stance

Stance is the first in an all-new line of handguns from Savage and built to deliver the kind of modern performance and ease of ownership you’re looking for. Select Stance models (Stance Black Laser and Stance Black Manual Safety Laser) come with a pre-installed Viridian E-Series laser. If your Stance model came standard with a Viridian E-Series laser, please ensure the battery is installed for operation. It is designed for everyday concealed carry and is trigger guard mounted, delivering rapid target acquisition. Follow these simple steps to learn how to install a Viridian E Series Laser on Stance.

WARNING! Always keep the muzzle pointed in a safe direction. Make sure your firearm is completely unloaded before attempting any field stripping or disassembly. Always wear safety glasses when field stripping or during disassembly/reassembly of your pistol.

How to Install a Viridian E-Series Laser on Stance

1. If your Stance is equipped with a manual safety, engage the safety to the SAFE position.
2. Press the magazine release and remove the magazine.
3. Pull the slide rearward and ensure that the chamber is clear of ammunition.
4. Allow the slide to go forward.
5. Remove laser and components from the box.
6. Install the provided battery into the laser.
7. Snap half of the laser onto the trigger guard.
8. Install the provided screws into the laser housing. The two mounting screw locations are the holes closest to the trigger guard.
9. Carefully install the second half of the laser module onto the already installed portion.
10. Using the provided tool, tighten both screws until just snug. Be sure to not over-tighten.

Safe firearm ownership is your responsibility. When something does not sound, feel, or look right, seek the advice of a professional gunsmith immediately.

If you have any questions, please refer to your owner’s manual and call our customer service team at 1-800-370-0708 (Monday-Friday, 8am-5pm ET)