A crisp, clean trigger minimizes the negative influence a shooter can have on accuracy. The AccuTrigger is the first factory trigger design to have minimal sear engagement to safely allow a light, crisp trigger break.  Additionally, the AccuTrigger lets the shooter easily adjust the pull weight to suit their personal preferences without sacrificing safety. The steps to adjust the AccuTrigger vary slightly based on the model. Find the specific directions for your model in the list below to learn how to adjust the AccuTrigger.  

Models

Centerfire

• Model 110 Bottom Bolt Release
• Model 110 Side Bolt Release
• Impulse
• Axis II
• Model 25

Rimfire

• A Series
• B Series
• B.MAG (Synthetic Stock)
• B.MAG (Laminate Stock)
• Mark I, Mark II, 93, 93R17, Rascal

Shotgun

• Model 220/212 Bottom Bolt Release
• Model 220/212 Side Bolt Release

WARNING! Always keep the muzzle pointed in a safe direction. Make sure your firearm is completely unloaded and ensure that your workspace is void of ammunition at all times. The safety should be set to the Full Safe position. Always wear safety glasses. 

How to Adjust the AccuTrigger

*These are the general steps on AccuTrigger adjustment. Please find the specific directions for your model in the list above.

1. Place the safety selector into the full safe position.
2. Remove the magazine and open the bolt.
3. You may need to remove the stock. (Refer to your model’s specific instructions)
4. Insert the provided AccuTrigger tool into the trigger return spring and rotate until you feel the slot engage the end of the spring. (Refer to your model’s specific instructions. Note: An AccuTrigger tool is not needed for B.MAG models.)
5. To adjust the trigger weight higher, rotate the tool clockwise. You will feel a click when it is set to the maximum.
6. To adjust the trigger weight lower, rotate the tool counterclockwise. Stop when you feel the tension increase. The weight is now set to its minimum.
7. To check the trigger weight setting, close the action. Place the safety selector into the fire position and dry fire the firearm.
8. Reinstall the stock, if necessary. (Refer to your model’s specific instructions)
9. Cycle the action several times to be sure it functions properly. 
10. Verify that all positions of the safety function properly. When the safety is in the full safe position, the trigger should have no movement when pressed.
11. Reinstall the magazine.

Safe firearm ownership is your responsibility. When something does not sound, feel, or look right, seek the advice of a professional gunsmith immediately.

If you have any questions about AccuTrigger adjustment, please refer to your owner’s manual and call our customer service team at 1-800-370-0708 (Monday-Friday, 8am-5pm ET)